Product Description

Model NO.: YND-WG09


Application: Gabion Mesh, Gabions, Construction Wire Mesh


Usage: Civil Engineering


Surface Treatment: Galvanized


Aperture: 50*50mm - 100*100mm


Diaphragm: Every 1 Meter


Transport Package: in Pallet


Origin: China




Material: Galvanized Iron Wire


Hole Shape: Square


Technics: Welded


Size: 1m x 1m x 1m


Diameter: 3.0 -5.0mm


Trademark: YND


Specification: ISO9001, SGS


HS Code: 73143100


Square hole Welded Gabion wire mesh box

Welded Gabion are made from rigid, lightweight, galvanized steel mesh that allows for machine filling,

holds the alignment of the face.



Welded Gabion Material:Low carbon steel wire ; Galvanized Wire

Nominal Box sizes (m)	Mesh size (mm)	No. of diaphragms (no.)	Capacity per box (m3)
1.0x1.0x0.5	50x50 75x75 50x100 100x100	0	0.50
1.0x1.0x1.0		0	1.00
1.5x1.0x0.5		0	0.75
1.5x1.0x1.0		0	1.50
2.0x1.0x0.5		1	1.00
2.0x1.0x1.0		1	2.00
3.0x1.0x0.5		2	1.50
3.0x1.0x1.0		2	3.00
4.0x1.0x0.5		3	2.00
4.0x1.0x1.0		3	4.00

Welded gabion advantages:

Blends easily and harmoniously with the natural surroundings.

Low cost alternative to concrete or masonry structures.

Very high resistance to natural forces due to better tensile strength.

Can withstand any unpredictable movement or settlement without loss of stability.

Simple and speedy installation, making it cost effective.

Quality finish and appearance is more aesthetically pleasing.

More rigid than woven mesh resulting in a more uniform finish when built.



Quicker and cheaper to install than Woven Mesh gabions because no pre-stretching required.

Special gabions sizes and mesh such as gabions with 4mm front mesh and 3mm mesh else can be available.



Application

1. Control and guide of water or flood

2. Preventing of rock breaking

3. Rock fall protection

4. Water and soil protection

5. Bridge protection

6. Strengthening structure of soil

7. Protection engineering of seaside area.

8. Port project

9. Keep off dust wall

10.Roadway protection.



How to install welded gabion ?



Step 1. Ends, diaphragms, front and back panels are placed upright on the bottom section of wire mesh.



Step 2. Secure panels by screwing spiral binders through the mesh openings in adjacent panels.



Step 3. Stiffeners shall be placed across the corners, at 300mm from the corner. Providing a diagonal bracing, and crimped over the line and cross wires on the front and side faces. None are needed in interior cells.

Step 4. Gabion Box filled with graded stone by hand or with a shovel.



Step 5. After filling, close the lid and secure with spiral binders at the diaphragms, ends, front and back.

Step 6. When stacking tiers of the Welded Gabion Box, the lid of the lower tier may serve as the base of the upper tier. Secure with spiral binders and add pre-formed stiffeners to exterior cells before filling with graded stones.



Packaging Detail: Pallet, in bundle, or as required.

Contact us if you need more details on Gabion. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Gabion Mesh、Welded Gabion. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Welded Gabion Box