Product Description

Model NO.: YND-PM


Ferritic: 430


Hole Shape: Round, Square, Hexgonal,Diamond,etc


Type: in Sheet or Roll


in Roll: Usually 1*20m


Package of Roll: Water Proof Paper, Woven Bags, Wood Boxes


Transport Package: in Pallet, in Bulk, or Cartons, or as Requested


Origin: Anping, China




Austenitic: 304,304L,316,316L,321


Martensitic: 410


Surface Treatment: None


in Sheet: Usually 1*2m


Package of Sheet: with Pallet


Trademark: Yun De


Specification: as requested


HS Code: 73145000


Stainless Steel Perforated Metal Mesh



1. Discriptions:

Perforated stainless steel sheet is essentially a low carbon steel which contains chromium at 10% or more by weight. The chromium content of the steel allows the formation of a rough, adherent, invisible, corrosion-resisting chromium oxide film on the steel surface. If damaged mechanically or chemically, this film is self-healing, providing that oxygen, even in very small amounts, is present.



Types:

1).Austenitic

Austenitic stainless steels are non-magnetic non heat-treatable steels that are usually annealed and cold worked. Some austenitic steels tend to become slightly magnetic after cold working. Austenitic steels have excellent corrosion and heat resistance with good formability over a wide range of temperatures. Additions of molybdenum can increase the corrosion resistance.

Typical industry applications: Food equipment, chemical equipment, architectural applications

- 304 Low carbon modification of type 302 for restriction of carbide precipitation during welding.

- 304L Extra-low carbon modification of type 304 for further restriction of carbide precipitation during welding.

- 316 Higher corrosion resistance than types 302 and 304, high creep strength.

- 316L Extra low carbon modification of types 316, used in welded construction where intergranular carbide precipitation must be avoided.

- 321 Stabilized for welds subject to severe corrosive conditions and for service from 800 to 1600F



2). Ferritic

Ferritic stainless steels are magnetic non heat-treatable steels that contain chromium but not nickel. They have good heat and corrosion resistance, in particular sea water, and good resistance to stress-corrosion cracking. Their mechanical properties are not as strong as the austenitic grades, however they have better decorative appeal.

Typical industry applications: Automotive trim, cooking utensils

- 430 General purpose non-hardenable chromium type.



3). Martensitic

Martensitic grades are magnetic and can be hardened by heat treatment. They are not as corrosive resistant as austenitic or ferritic grades, but their hardness levels are among the highest of the all the stainless steels.

Typical industry applications: Fasteners, pump shafts, turbine blades

- 410 General purpose heat treatable type.



2. Hole Diameter: 0.5-100mm



3. Dimension: The most common width and length are as follows:

1000mmX2000mm

1220mmX2400mm

1250mmX2500mm

1250mmX6000mm

1500mmX3000mm

1500mmX6000mm



4. Application: Perforated material is widely use as agriculture equipment, audio, automotive & transport, architecture, design, electronics, noise control, pharmaceutical, filtration, etc.



5. The packing: Wrapped with plastic paper, then in wooden pallet



6. The parameters we need to quote to you are as follows:

1)Hole shape

2)hole Diameter: The size of the holes

3)Hole pattern: Staggered or straight

4)Pitch(the distance between two nearest holes' center)

5)Dimension: Width and length

6)Quantity

Thickness: 0.5-25mm

Thickness of the matel sheets do not change during the perforation.

Plate Material	Thickness of Metal (mm)	Hole Dia. (mm)	Pitch (mm)	Sheet Width (m)	Sheet Length (m)	Porosity (%)	Weight (kg/m2)
Rolling plate	0.2	6	2	1	20	44	0.88
	0.35	5	4	1	20	24	2
	0.45	6	3	1	20	35	2.5
	0.8	3	3	1	20	19.6	3
Flat plate	0.5	1	1	1	2	19.6	3.14
	0.55	1.1	2.2	1	2	22.67	3.411
	0.55	1.5	2.8	1	2	26.03	3.268
	0.8	1.5	1.5	1	2	19.6	5
	0.8	2.0	3.4	1	2	30.78	4.465
	1.5	2	2	1	2	19.6	9.4
	1.5	5.0	8.0	1	2	35.39	7.843
	3	5	16	1	2	19.6	18.8
Stainless steel plate	0.5	1	1	1	2	19.6	3.14
	0.8	1.5	1.5	1	2	19.6	5
	1	2	2	1	2	19.6	6.28
	2	5	16	1	2	19.6	6.28
Aluminum plate	0.5	1	1	1	2	19.6	1.08
	0.8	3	3	1	2	19.6	1.72
	1.6	2	2	1	2	19.6	3.24
	3	4	16	1	2	19.6

Contact us if you need more details on Perforated Metal. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Perforated Metal Mesh、Perforated Sheet. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Perforated Metal Sheet